After staying up a little later than usual, I pushed the latest ASX value screener code to heroku - only for it to be rejected as now bundler was being used for everything. Bugger.
If you are following the instructions on converting a 2.3.5 rails app to use bundler and you get an error like this:
$ rake db:migrate --trace
(in ...)
** Invoke db:migrate (first_time)
** Invoke environment (first_time)
** Execute environment
rake aborted!
uninitialized constant Rails::Boot::Bundler
/usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:105:in `const_missing'
You have probably misspelt preinitialize.rb in your config directory. Correct it and ensure that it is added into your git and you will get rid of this error.
Uploading to heroku was where the next trap lay in wait:
$ git push heroku master
Counting objects: 24, done.
Delta compression using up to 2 threads.
Compressing objects: 100% (17/17), done.
Writing objects: 100% (17/17), 5.86 KiB, done.
Total 17 (delta 12), reused 0 (delta 0)
-----> Heroku receiving push
-----> Rails app detected
-----> Gemfile detected, running Bundler version 0.9.9
-----> Bundler works best on the Bamboo stack. Please migrate your app:
http://docs.heroku.com/bamboo
Unresolved dependencies detected; Installing...
/usr/local/lib/ruby/1.8/yaml.rb:133:in `load': syntax error on line 2, col 8: ` specs:' (ArgumentError)
from /usr/local/lib/ruby/1.8/yaml.rb:133:in `load'
To avoid this, switch to the bamboo stack as recommended and bundler will work as expected.
Eventually, site back up - off to bed.
Showing posts with label ruby on rails. Show all posts
Showing posts with label ruby on rails. Show all posts
Sunday, January 2, 2011
Sunday, December 19, 2010
Value investing screener
I needed a way to run a series of financial calculations over the entire Australian Stock Exchange (ASX).
Conventional stock screeners allow you to order by a whole bunch of parameters, but not your own customized formulas.
So I wrote a ASX value screener that focuses specifically on value investing. It consists of a calculator and a screener allowing you to calculate the future intrinsic value along the likes of Warren Buffett, Benjamin Graham and Australia's Roger Mongomerty.
I had this as an excel spreadsheet at first, but I figured if I wanted it - maybe someone else would too. So I used Ruby on Rails with the hobo plugin and I was up and running in a few minutes.
I spent a few months tidying up the design and getting user feedback, I'm pretty happy with the result. There's a small amount of traffic so I'm happy to keep the site up as it's regularly being used.
Conventional stock screeners allow you to order by a whole bunch of parameters, but not your own customized formulas.
So I wrote a ASX value screener that focuses specifically on value investing. It consists of a calculator and a screener allowing you to calculate the future intrinsic value along the likes of Warren Buffett, Benjamin Graham and Australia's Roger Mongomerty.
I had this as an excel spreadsheet at first, but I figured if I wanted it - maybe someone else would too. So I used Ruby on Rails with the hobo plugin and I was up and running in a few minutes.
I spent a few months tidying up the design and getting user feedback, I'm pretty happy with the result. There's a small amount of traffic so I'm happy to keep the site up as it's regularly being used.
Sunday, October 10, 2010
Hobo on Heroku
Ok, this was an ordeal that I don't want to have to repeat. So here's how to get your Hobo 1.0.0 app up and running on Heroku.
I'm not going over registering at Heroku or setting up Hobo. I'll presume that you are competent enough to do this yourself with the current guides on their respective sites.
The basics for this post is Tom Locke's recipe at HoboCentral. Also note that the Heroku default server is Aspen (aspen-mri-1.8.6).
So I set up a simple Hobo 1.0.0 app with 1 model. Using ruby 2.3.8, I can test on my app on the development server - no problems.
You will need to add a .gems file in your root directory, that should have all the extra gems that you require. Heroku has a good set, but in order for completeness and futureproofing - add all the ones that you require. Mine looked like this (it will change by the end of this post):
rails -v 2.3.8
will_paginate --version 2.3.11
hobosupport --version 1.0.0
hobofields --version 1.0.0 --ignore-dependencies
hobo --version 1.0.0 --ignore-dependencies
When submitting this to heroku it doesn't start as:
Missing the Rails 2.3.8 gem. Please `gem install -v=2.3.8 rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.
I kept hitting this and there appears to be a problem with Heroku's server of choice 'thin' and hobo and 2.3.8 rails - it will not work with 2.3.8 - this means that you will have to roll back to 2.3.5 to get it up and running. I don't know enough about thin, all I know is that getting the thin gem and trying locally has the same error.
After changing to 2.3.5 in config/environment.rb and .gems:
rails -v 2.3.5
pg --version 0.8.0
will_paginate --version 2.3.11
hobosupport --version 1.0.0
hobofields --version 1.0.0 --ignore-dependencies
hobo --version 1.0.0 --ignore-dependencies
(I also added pg's gem not 100% sure that I need it, but I saw it on heroku's example)
This gets you past the rails problems, only to hit:
/config/initializers/cookie_verification_secret.rb:7: undefined method `cookie_verifier_secret=' for ActionController::Base:Class (NoMethodError)
This seems to be a hobo version error, some new functionality that doesn't work in 2.3.5, my app doesn't require user protection, so I manually edited cookie_verification_secret.rb, commenting out that line.
This is not an ideal solution (in fact I would just call it a hack), you would probably need to step back to an older version of Hobo, I'm hoping to look ahead to Hobo 1.3.x so I'm not worried about finding the correct old hobo version.
Once I did this I was able to:
heroku rake db:migrate
...and finally the app is up and running.
Hope this helps someone.
I'm not going over registering at Heroku or setting up Hobo. I'll presume that you are competent enough to do this yourself with the current guides on their respective sites.
The basics for this post is Tom Locke's recipe at HoboCentral. Also note that the Heroku default server is Aspen (aspen-mri-1.8.6).
So I set up a simple Hobo 1.0.0 app with 1 model. Using ruby 2.3.8, I can test on my app on the development server - no problems.
You will need to add a .gems file in your root directory, that should have all the extra gems that you require. Heroku has a good set, but in order for completeness and futureproofing - add all the ones that you require. Mine looked like this (it will change by the end of this post):
rails -v 2.3.8
will_paginate --version 2.3.11
hobosupport --version 1.0.0
hobofields --version 1.0.0 --ignore-dependencies
hobo --version 1.0.0 --ignore-dependencies
When submitting this to heroku it doesn't start as:
Missing the Rails 2.3.8 gem. Please `gem install -v=2.3.8 rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.
I kept hitting this and there appears to be a problem with Heroku's server of choice 'thin' and hobo and 2.3.8 rails - it will not work with 2.3.8 - this means that you will have to roll back to 2.3.5 to get it up and running. I don't know enough about thin, all I know is that getting the thin gem and trying locally has the same error.
After changing to 2.3.5 in config/environment.rb and .gems:
rails -v 2.3.5
pg --version 0.8.0
will_paginate --version 2.3.11
hobosupport --version 1.0.0
hobofields --version 1.0.0 --ignore-dependencies
hobo --version 1.0.0 --ignore-dependencies
(I also added pg's gem not 100% sure that I need it, but I saw it on heroku's example)
This gets you past the rails problems, only to hit:
/config/initializers/cookie_verification_secret.rb:7: undefined method `cookie_verifier_secret=' for ActionController::Base:Class (NoMethodError)
This seems to be a hobo version error, some new functionality that doesn't work in 2.3.5, my app doesn't require user protection, so I manually edited cookie_verification_secret.rb, commenting out that line.
This is not an ideal solution (in fact I would just call it a hack), you would probably need to step back to an older version of Hobo, I'm hoping to look ahead to Hobo 1.3.x so I'm not worried about finding the correct old hobo version.
Once I did this I was able to:
heroku rake db:migrate
...and finally the app is up and running.
Hope this helps someone.
Sunday, August 1, 2010
Ruby on rails 3 - rvm, bundle, eeeekk
Having a freshly loaded Ubuntu 10.04 on my main desktop (after checking it out for months on my laptop), I thought I'd get ruby on rails set up. After setting up Rails 2 with the minimum of fuss, I took the challenge of upgrading to Rails 3 (release candidate).
RVM is now an essential component of any rails environment, letting you change between rails version in an instant (Theoretically, but more on that soon).
Installing it was as simple as:
$ bash < <( curl http://rvm.beginrescueend.com/releases/rvm-install-head )
After installing all the necessary ubuntu packages
$ rvm install 1.9.2-rc2
$
$
I can't seem to switch between rubies as I would like, but I'm sure I can solve this soon.
To start a new project we have to forget the rails 2 ways and start with:
This is where I had some problems with mysql. I had installed every possible mysql package but it stll wasn't working.
Using activeresource (3.0.0.rc)
Using bundler (1.0.0.rc.1)
Installing mysql (2.8.1) with native extensions /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:483:in `build_extensions': ERROR: Failed to build gem native extension. (Gem::Installer::ExtensionBuildError)
/usr/bin/ruby1.8 extconf.rb
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lm... yes
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lz... yes
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lsocket... no
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lnsl... yes
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lmygcc... no
checking for mysql_query() in -lmysqlclient... no
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of
necessary libraries and/or headers. Check the mkmf.log file for more
details. You may need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/usr/bin/ruby1.8
--with-mysql-config
--without-mysql-config
--with-mysql-dir
--without-mysql-dir
--with-mysql-include
--without-mysql-include=${mysql-dir}/include
--with-mysql-lib
--without-mysql-lib=${mysql-dir}/lib
--with-mysqlclientlib
--without-mysqlclientlib
--with-mlib
--without-mlib
--with-mysqlclientlib
--without-mysqlclientlib
--with-zlib
--without-zlib
--with-mysqlclientlib
--without-mysqlclientlib
--with-socketlib
--without-socketlib
--with-mysqlclientlib
--without-mysqlclientlib
--with-nsllib
--without-nsllib
--with-mysqlclientlib
--without-mysqlclientlib
--with-mygcclib
--without-mygcclib
--with-mysqlclientlib
--without-mysqlclientlib
Gem files will remain installed in /home/stumacd/RoR/projects/wiki/ruby/1.8/gems/mysql-2.8.1 for inspection.
Results logged to /home/stumacd/RoR/projects/wiki/ruby/1.8/gems/mysql-2.8.1/ext/mysql_api/gem_make.out
from /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:446:in `each'
from /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:446:in `build_extensions'
from /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:198:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/source.rb:96:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/installer.rb:51:in `run'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/spec_set.rb:12:in `each'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/spec_set.rb:12:in `each'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/installer.rb:40:in `run'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/installer.rb:8:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/cli.rb:115:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/task.rb:22:in `send'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/task.rb:22:in `run'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/invocation.rb:109
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/invocation.rb:116:in `call'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/invocation.rb:116:in `invoke'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor.rb:161:in `start'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/base.rb:379:in `start'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor.rb:140:in `start'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/bin/bundle:13
from /usr/bin/bundle:19:in `load'
from /usr/bin/bundle:19
The trick was to install it with the correct parameters (found by using $ which mysql)
$ gem install mysql -- --with-mysql-conf=/usr/bin/mysql --with-mysql-lib=/usr/lib/mysql
This allowed all the applicable gems to be installed.
And now with a:
$ rails server
WEBrick was up and running and http://localhost:3000 was showing the standard page. Gold dust :)
RVM is now an essential component of any rails environment, letting you change between rails version in an instant (Theoretically, but more on that soon).
Installing it was as simple as:
$ bash < <( curl http://rvm.beginrescueend.com/releases/rvm-install-head )
After installing all the necessary ubuntu packages
$ rvm install 1.9.2-rc2
$
rvm 1.9.2-rc2$
gem install rails --preI can't seem to switch between rubies as I would like, but I'm sure I can solve this soon.
To start a new project we have to forget the rails 2 ways and start with:
$ rails new test_project
You should see the usual files (plus a few new ones) being created.
$ cd test_project
$ bundle installThis is where I had some problems with mysql. I had installed every possible mysql package but it stll wasn't working.
Using activeresource (3.0.0.rc)
Using bundler (1.0.0.rc.1)
Installing mysql (2.8.1) with native extensions /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:483:in `build_extensions': ERROR: Failed to build gem native extension. (Gem::Installer::ExtensionBuildError)
/usr/bin/ruby1.8 extconf.rb
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lm... yes
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lz... yes
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lsocket... no
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lnsl... yes
checking for mysql_query() in -lmysqlclient... no
checking for main() in -lmygcc... no
checking for mysql_query() in -lmysqlclient... no
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of
necessary libraries and/or headers. Check the mkmf.log file for more
details. You may need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/usr/bin/ruby1.8
--with-mysql-config
--without-mysql-config
--with-mysql-dir
--without-mysql-dir
--with-mysql-include
--without-mysql-include=${mysql-dir}/include
--with-mysql-lib
--without-mysql-lib=${mysql-dir}/lib
--with-mysqlclientlib
--without-mysqlclientlib
--with-mlib
--without-mlib
--with-mysqlclientlib
--without-mysqlclientlib
--with-zlib
--without-zlib
--with-mysqlclientlib
--without-mysqlclientlib
--with-socketlib
--without-socketlib
--with-mysqlclientlib
--without-mysqlclientlib
--with-nsllib
--without-nsllib
--with-mysqlclientlib
--without-mysqlclientlib
--with-mygcclib
--without-mygcclib
--with-mysqlclientlib
--without-mysqlclientlib
Gem files will remain installed in /home/stumacd/RoR/projects/wiki/ruby/1.8/gems/mysql-2.8.1 for inspection.
Results logged to /home/stumacd/RoR/projects/wiki/ruby/1.8/gems/mysql-2.8.1/ext/mysql_api/gem_make.out
from /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:446:in `each'
from /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:446:in `build_extensions'
from /usr/local/lib/site_ruby/1.8/rubygems/installer.rb:198:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/source.rb:96:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/installer.rb:51:in `run'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/spec_set.rb:12:in `each'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/spec_set.rb:12:in `each'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/installer.rb:40:in `run'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/installer.rb:8:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/cli.rb:115:in `install'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/task.rb:22:in `send'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/task.rb:22:in `run'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/invocation.rb:109
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/invocation.rb:116:in `call'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/invocation.rb:116:in `invoke'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor.rb:161:in `start'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor/base.rb:379:in `start'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/lib/bundler/vendor/thor.rb:140:in `start'
from /usr/lib/ruby/gems/1.8/gems/bundler-1.0.0.rc.1/bin/bundle:13
from /usr/bin/bundle:19:in `load'
from /usr/bin/bundle:19
The trick was to install it with the correct parameters (found by using $ which mysql)
$ gem install mysql -- --with-mysql-conf=/usr/bin/mysql --with-mysql-lib=/usr/lib/mysql
This allowed all the applicable gems to be installed.
And now with a:
$ rails server
WEBrick was up and running and http://localhost:3000 was showing the standard page. Gold dust :)
Subscribe to:
Posts (Atom)